Model AT 700 DHJC (33 Tons)
Continuous Extrusion Shuttle Blow Molding Machine
For the production of stackable jerry cans.
General Specifications
| Description | US | Metric |
|---|---|---|
| Carriage Horizontal Shuttle Stroke: | 28 inches | 700 mm |
| Dry Cycle: | 3 s 300 ms | 3 s 300 ms |
| Clamp Force: | 33 US tons | 300 kN |
| Air Pressure: | 87 – 116 psi | 6 – 8 bar |
| Air Consumption (Estimated): | 106 cfm | 3000 lt/min |
| Hydraulic Cooling Capacity: | 47,587 btu/hr | 12,000 kcal/hr |
| Mold Cooling Capacity: | 674 btu/hr (HDPE) | 170 kcal/hr (HDPE) |
| Water Cooling Pressure (Min): | 58 psi | 4 bar |
| Pump Motor Power: | 40 hp | 30 kW |
| Total Power Installed (Estimated): | 235 kW | 235 kW |
| Dimensions: | 197 x 236 x 156 inches | 5000 x 6000 x 3950 mm |
| Total Weight: | 51,808 lbs | 23,500 kg |
More than half of the injection blow mold machines in use throughout the world today were built by Jomar.
Contact us today to put our 50 years of industry expertise to work!
Sales InquiriesGeneral Inquiries
