AT 2 DH (7.7 Tons)
Continuous Extrusion Blow Molding Machine
For the production of plastic containers.
General Specifications
| Description | US | Metric |
|---|---|---|
| Carriage Horizontal Shuttle Stroke: |
14.4 inches |
365 mm |
| Dry Cycle: | 1s 800ms | 1s 800ms |
| Clamp Force: |
7.7 US tons |
70 kN |
| Air Pressure: |
87 -116 psi |
6 – 8 bar |
| Air Consumption (Estimated): |
42 cfm |
1200 lt/min |
| Hydraulic Cooling Capacity: |
13,880 btu/hr |
3500 kcal/hr |
| Mold Cooling Capacity: | 674 btu/hr (HDPE) | 170 kcal/hr (HDPE) |
| Water Cooling Pressure (Min): | 44 psi | 3 bar |
| Pump Motor Power: | 12 hp | 9 kW |
| Total Power Installed (Estimated): | 70 kW | 70 kW |
| Dimensions: | 100.4 x 157.5 x 126 inches | 2550 x 4000 x 3200 mm |
| Total Weight: | 12,348 lbs | 5600 kg |
More than half of the injection blow mold machines in use throughout the world today were built by Jomar.
Contact us today to put our 50 years of industry expertise to work!
Sales InquiriesGeneral Inquiries
