Model AT 400 DH (7.7 Tons)
Continuous Extrusion Shuttle Blow Molding Machine
For the production of plastic containers.
General Specifications
| Description | US | Metric |
|---|---|---|
| Carriage Horizontal Shuttle Stroke: | 16 inches | 400 mm |
| Dry Cycle: | 1 s 900 ms | 1 s 900 ms |
| Clamp Force: | 8 US tons | 70 kN |
| Air Pressure: | 87 – 116 psi | 6 – 8 bar |
| Air Consumption (Estimated): | 53 cfm | 1500 lt/min |
| Hydraulic Cooling Capacity: | 23,794 btu/hr | 6000 kcal/hr |
| Mold Cooling Capacity: | 674 btu/hr (HDPE) | 170 kcal/hr (HDPE) |
| Water Cooling Pressure (Min): | 51 psi | 3.5 bar |
| Pump Motor Power: | 20 hp | 15 kW |
| Total Power Installed (Estimated): | 115 kW | 115 kW |
| Dimensions: | 161 x 177 x 12 inches | 4100 x 4500 x 3000 mm |
| Total Weight: | 17,640 lbs | 8000 kg |
More than half of the injection blow mold machines in use throughout the world today were built by Jomar.
Contact us today to put our 50 years of industry expertise to work!
Sales InquiriesGeneral Inquiries
