Model AT 480 DH (11/17.6 Tons)
Continuous Extrusion Shuttle Blow Molding Machine
For the production of plastic containers.
General Specifications
| Description | US | Metric |
|---|---|---|
| Carriage Horizontal Shuttle Stroke: | 19 inches | 480 mm |
| Dry Cycle: | 2 s 200 ms | 2 s 200 ms |
| Clamp Force: | 11/18 US tons | 100/160 kN |
| Air Pressure: | 87 – 116 psi | 6 – 8 bar |
| Air Consumption (Estimated): | 71 cfm | 2000 lt/min |
| Hydraulic Cooling Capacity: | 29,472 btu/hr | 7500 kcal/hr |
| Mold Cooling Capacity: | 674 btu/hr (HDPE) | 170 kcal/hr (HDPE) |
| Water Cooling Pressure (Min): | 44 psi | 3 bar |
| Pump Motor Power: | 25 hp | 18.5 kW |
| Total Power Installed (Estimated): | 115 kW | 115 kW |
| Dimensions: | 138 x 189 x 126 inches | 3500 x 4800 x 3200 mm |
| Total Weight: | 28,665 lbs | 13,000 kg |
More than half of the injection blow mold machines in use throughout the world today were built by Jomar.
Contact us today to put our 50 years of industry expertise to work!
Sales InquiriesGeneral Inquiries
