Model AT 255 DH (2.3 Tons)
Continuous Extrusion Shuttle Blow Molding Machine
For the production of plastic containers.
General Specifications
| Description | US | Metric |
|---|---|---|
| Carriage Horizontal Shuttle Stroke: | 10 inches | 255 mm |
| Dry Cycle: | 1 s 400 ms | 1 s 400 ms |
| Clamp Force: | 2.3 US tons | 21 kN |
| Air Pressure: | 87 – 116 psi | 6 – 8 bar |
| Air Consumption (Estimated): | 35 cfm | 1000 lt/min |
| Hydraulic Cooling Capacity: | 19,035 btu/hr | 4800 kcal/hr |
| Mold Cooling Capacity: | 674 btu/hr (HDPE) | 170 kcal/hr (HDPE) |
| Water Cooling Pressure (Min): | 44 psi | 3 bar |
| Pump Motor Power: | 20 hp | 15 kW |
| Total Power Installed (Estimated): | 75 kW | 75 kW |
| Dimensions: | 95 x 122 x 122 inches | 2400 x 3100 x 3100 mm |
| Total Weight: | 7718 lbs | 3500 kg |
More than half of the injection blow mold machines in use throughout the world today were built by Jomar.
Contact us today to put our 50 years of industry expertise to work!
Sales InquiriesGeneral Inquiries
