AT 10 SH (16.5 Tons)
Continuous Extrusion Blow Molding Machine
For the production of plastic containers.
General Specifications
| Description | US | Metric |
|---|---|---|
| Carriage Horizontal Shuttle Stroke: |
21.7 inches |
550 mm |
| Dry Cycle: |
3 s |
3 s |
| Clamp Force: |
17 US tons |
150 kN |
| Air Pressure: |
87 -116 psi |
6 – 8 bar |
| Air Consumption (Estimated): |
53 cfm |
1500 lt/min |
| Hydraulic Cooling Capacity: |
29,742 btu/hr |
7500 kcal/hr |
| Mold Cooling Capacity: | 674 btu/hr (HDPE) | 170 kcal/hr (HDPE) |
| Water Cooling Pressure (Min): | 44 psi | 3 bar |
| Pump Motor Power: | 25 hp | 18.5 kW |
| Total Power Installed (Estimated): | 105 kW | 105 kW |
| Dimensions: | 130 x 12 x 138 inches | 3300 x 300 x 3500 mm |
| Total Weight: | 26,460 lbs | 12,000 kg |
More than half of the injection blow mold machines in use throughout the world today were built by Jomar.
Contact us today to put our 50 years of industry expertise to work!
Sales InquiriesGeneral Inquiries
