Standard Features
- Programmable control system with touch screen
- Screw speed tachometer
- Running time recorder
- Alarm system (visual and audible)
- Two pressure blow air
- High and low plastifier temperature alarms
- Cycle time indicator
- Preform hot water manifold
- Blow mold cooling manifold
- Choice of plastifier screws: General purpose for PE, PS and PP or special screws for PVC, PP and PET
- Laser Electric preform detector
- Current ANSI/EC safety standards
- Ceramic heater bands
- Integrated heat controls
- Resettable cycle counter
- Retains over 250 sets of process parameters
- Fully proportional hydraulics
- Two pressure preform injection
- Internal and external cooling
Unique to IntelliDrive™
- Servo motor-drive plastifier pump
- Jomar RPM for plastifier
- Jomar Power Pack
- Closed loop press control
- Electric controlled indexer
- Variable frequency drive
- Quick change cylinders
- Reinforced main platen
- Digital displacement transducers
- Special warranty
Machine Dimensions
Description | US | Metric |
---|---|---|
Length: | 121.5″ | 309 cm |
Width: | 85″ | 216 cm |
Height with 2.0″ (50.8 mm) 30:1 Vertical Screw | 134″ | 341 cm |
Height with 2.5″ (63.5 mm) 24:1 Vertical Screw | 134″ | 341 cm |
Height with 2.5″ (63.5 mm) 30:1 Vertical Screw | 154″ | 391 cm |
Installed Weight: | 16,500 lbs | 7,485 kg |
More than half of the injection blow mold machines in use throughout the world today were built by Jomar.
Contact us today to put our 50 years of industry expertise to work!
Sales InquiriesGeneral Inquiries